OUTSIDE THE USA?
SENSIT RAMP
SENSIT RAMP

The SENSIT® RAMP is a comprehensive air quality monitoring platform that can easily be deployed at a low cost. Capable of monitoring up to five gaseous chemical pollutants, temperature, humidity, particulate matter, and meteorological conditions.

Downloads

Want to Learn More?

REQUEST INFO

Introduction

The SENSIT® RAMP is an affordable air quality monitoring platform that tracks five gaseous chemical pollutants: temperature, humidity, particulate matter, and meteorological conditions.  Additionally, it uses electrochemical sensors to provide accurate readings with a resolution of PPB for CO, NO, NO2, O3, and SO2 gases. It also has a PM2.5 particulate matter sensor for measuring pollutants in the air.

Moreover, this comprehensive monitoring tool is highly versatile and valuable for assessing air quality in a variety of settings.

Standard Features

  • Durable, Weather Resistant Housing
  • Long Life, Low-Cost Sensors
  • Local or Remote Operation
  • Wireless Cellular
  • SD Card Data Backup
  • Battery Backup

Applications

Remote air quality monitoring can be used to monitor air pollution levels in remote areas where human intervention is limited. This technology can be used to alert authorities of high pollution levels and help them take necessary actions to mitigate the problem.

Pollutant source identification is another application of air quality monitoring. By analyzing air quality data from multiple sensors, it is possible to identify the sources of pollutants and take action to reduce them.

Industrial site monitoring is also an important application of air quality monitoring. By monitoring the air quality around industrial sites, it is possible to ensure the safety of workers and the community. This can also help industries comply with environmental regulations.

Traffic pattern optimization is another application of air quality monitoring. By monitoring traffic patterns and air quality levels, it is possible to optimize traffic flow and reduce pollution levels in congested areas.

Environmental impact studies can also benefit from air quality monitoring. By monitoring air quality levels before and after a project, it is possible to assess the impact of the project on the environment.

Finally, wildfire air quality monitoring can be used to alert residents of high pollution levels during wildfires. This can help people take necessary precautions to protect themselves from the harmful effects of smoke and other pollutants.

Standard Sensors

  • Carbon Monoxide – CO
  • Carbon Dioxide – CO2
  • Nitric Oxide – NO
  • Nitrogen Oxide – NO2
  • Ozone – O3
  • Sulfur Dioxide – SO2
  • Particulate Matter – PM1, PM2.5, PM10
  • TVOC (PID or MOS), Temperature, & Relative Humidity, Anemometer

Optional Electrochemical SENSORS

  • Hydrogen Sulfide – H2S
  • Ammonia – NH3
  • Volatile Organic Compounds – VOCs

In conclusion, the SENSIT® RAMP platform monitors five gaseous chemical pollutants, temperature, humidity, particulate matter, and meteorological conditions. The electrochemical sensors provide accurate readings with a resolution of PPB for CO, NO, NO2, O3, and SO2 gases. It has internal SD storage, optional solar charging, and global cellular integration for remote operation. With four I/O ports for additional instrumentation, it’s a versatile solution for air quality assessment.

Related Product Videos

MORE ON YOUTUBE

Technical Specification

Additional information

Sensor Types

CO2
CO
NO
NO2
O3
SO2
PM2.5
Detection Technology

NDIR Optical, Electrochemical, Laser Scattering
Measurement Range (Standard)

CO2 – 100-2,000 PPM
CO – 20 PPB-25 PPM
NO – 20 PPB-25 PPM
NO2 – 20 PPB-25 PPM
O3 – 20 PPB-25 PPM
SO2 – 20 PPM-25 PPM
PM2.5 – 1-1000 ug/m3
Accuracy (Standard)

CO2 – ±100 PPM min or 50%
CO – ±20 PPB min or 50%
NO – ±20 PPB min or 50%
NO2 – ±20 PPB min or 50%
O3 – ±20 PPB min or 50%
SO2 – ±20 PPB min or 50%
PM2.5 – ±10 ug min or 50%
Response Time (Standard)

CO2 – 30 sec
CO – 60-90 sec
NO – 60-90 sec
NO2 – 60-90 sec
O3 – 60-90 sec
SO2 – 60-90 sec
PM2.5 – 12-30 sec
Measurement Range (High)

CO2 – 400-10,000 PPM
CO – 1-1,000 PPM
NO – 1-1,000 PPM
NO2 – 1-1,000 PPM
O3 – 1-1,000 PPM
SO2 – 1-1,000 PPM
PM2.5 – 1-1000 ug/m3
Accuracy (High)

CO2 – ±400 PPM min or 30%
CO – ±2 PPM min or 10%
NO – ±2 PPM min or 10%
NO2 – ±2 PPM min or 10%
O3 – ±2 PPM min or 10%
SO2 – ±2 PPM min or 10%
PM2.5 – ±10 ug min or 50%
Response Time (High)

CO2 – 30 sec
CO – 30 sec
NO – <30 sec
NO2 – <30 sec
O3 – <30 sec
SO2 – <30 sec
PM2.5 – 15-30 sec
Size

Fully assembled without anemometer or antenna D x W x H (5” x 10” x 12”)
Weight

Base unit: 7.5 lbs
Operating Temperature

-20°C to 50°C
Data Storage Capacity

100 Instant Event Saves
1600 Auto Log Saves
100 Bar Hole Tests

Common Accessories

Related Products

SENSIT CVC
SENSIT SPOD C1D2
SENSIT RAMP